Please refer to the Images above; Product Specifications, Associate Part Chart and the Model Fit Guide below to Ensure a proper fit. PRODUCT NUMBER AND VARIATIONS: 117-9145, 117 9145, 1179145 PRODUCT TYPE: Auger/Rotor Clutch Cable SIZE: Length 3.900 in. - Width 3.900 in. - Height 0.100 in. - Weight 0.030 lbs. NOTES & DETAILS: Toro OEM 117-9145 IS COMMINLY USED - Inserts into the Idler Pulley Tensioner Arm as well as the Clutch Spring/Cable Adjuster Plate and Tightens the Belt when the Operator Engages the Auger/Rotor Bail Handle or Upper Handle Clutch Bail - The Tightening Action of the Cable and Belt Engages the Auger/Rotors. COMMON SERIES APPLICATIONS: Toro Select 21" Power Clear & Quick Clear (Only Model 38564) Snow Blower Models. MODEL FIT CHART: SNOWBLOWER’S QUICK CLEAR Series – Model Numbers – (* Model Numbers 38564) POWER CLEAR Series – Model Numbers – (* Model Numbers 38451,38452, 38587, 38593, 38741, 38742) ASSOCIATED PARTS CHART: ASSOCIATED PARTS REFERENCES FOR PART NUMBER 117-9145 ONLY CLICK ON THE ASSOCIATED PART NUMBER TO BE REDIRECTED 136-7138 - AUGER/ROTOR TENSIONER IDLER ARM (Connects to the Auger/Rotor Clutch Cable and Contain an Idlers Pulley That Rest Against the Auger Belt when tightened - 136-7138 Pivots when pulled by the cable as the Operator Engages the Auger/Rotor Clutch Handle) x1 Per Auger/Rotor Clutch Cable 136-7126 - CLUTCH SPRING/CABLE ADJUSTMENT PLATE (Serves as the link between the Clutch Cable and the Clutch Cable Spring to which both would Hook Into - 136-7126 Contains Numerous Whole for Adjustment Purposes) x1 Per Clutch Cable and Spring 140-3660 - COMPLETE CABLE GUIDE KIT (* Contains Screw, Nylon Lock Nut, Cable Guide, Cable Guide Cap - Installed on the Frame of the Snow Blower - Aguer/Rotor Clutch Cable Feeds through the Cable Guide and Enables the Cable to be Redirected into and Operated in a 90 Degree Angle without Rubbing Against anything that is Sharp or Rough that would Prematurely Wear the Cable - Cable Guides are Made of a Softer Aluminum Material and May Wear Over Time Causing them to obtain Rough Edges - Important to Check the Cable Guide when Replacing the Auger Clutch Cable) x1 Per Auger/Rotor Clutch Cable
