3DR CAN POWER MODULE The 3DR CAN Power Module is a cutting-edge solution designed to provide reliable and accurate power monitoring for UAV systems. Built around the ACS37800 power monitoring IC, this module delivers 0.85 mΩ primary conductor resistance, minimizing power loss while handling high inrush currents. With support for 50.4V 12S LiPo batteries and the ability to sense 60 Amps continuous current (with a 90A maximum), this power module offers precise performance across its entire range. The module also features integrated capacitors to reduce voltage noise, and it includes an electrolytic capacitor for compensating longer battery wire lengths and motor noise. For ease of setup, the 3DR CAN Power Module is compatible with CAN protocols, and it includes all necessary cables for seamless integration. Note: Control Zero with an aluminum enclosure and ‘Stick’ carrier board are not included. View CAN Power Module's documentation Electrical: 50.4V 12S LiPo 60 Amps Continuous - 90 Amps Max Current Sensing 5.3V, 3A power supply Default Settings: Set BATT_MONITORx to 8 (CAN) Mechanical: Board Weight: 5.90g (0.208 oz) Board Dimensions: 26mm x 26mm (1.02"x1.02") Accesories included: Molex ClikMate 2mm 6-pin to 2x JST-GH cable (6-pin PWR and 4-pin CAN) JST-GH 4 to JST-GH 4 cable Important! The module comes with pre-calibrated values, however end users are encouraged to verify and tune constants provided in the module's paramaters.BATT_V_FINE_M and BATT_C_FINE_M are multipliers (1.0 default) to fine tune your power readings for your airframe. Keep a safe margin of battery capacity until calibrated and confirmed. The measurements below are shipping related: SKU: m10104 Width: 4.00 (in) Height: 6.00 (in) Depth: 0.50 (in)
