4013 Createx Water-Based Reducer with isopropyl alcohol. Createx 4013 Reducer is formulated with isopropyl alcohol, which makes this organic reducer evaporate faster and improve the paint's surface drying time. The performance differences (in terms of atomization and drying times) mean you may have to adjust your mix ratios and waiting time accordingly. It can be used across all solid-color paints, including Wicked Colors, Airbrush Colors, and Illustration Colors (keep it under 10%). However, it is not recommended for candy2o and AutoBorne Sealers. How’s 4013 reducer different from 4011? 4013 is an interesting additive. Flammable, so make sure to keep it in a fire-proof cabinet. Flammable due to isopropyl alcohol in this product. It helps to flush water from the paint which reduces drying time on the surface, and it also reduces tip drying. That’s why some artists prefer to use this reducer when airbrushing. How to properly reduce Createx paints with 4013? The small steps approach applies here as well. If too much reducer is added at once, it can shock paint and lead to seeding/chunking and clogging the airbrush/spray gun as a result. Start with 5% or so. Don’t have to be super precise, eyeballing is fine but try to be close to 5%, no more than 10%. A 4013 reducer is effective, and even a 5% change can significantly change the way paint sprays. For best performance, after adding the reducer to the paint, let it sit for 10 minutes. That would allow the reducer to acclimate with the paint, and you will see the best effect. If 5-10% was not enough, you can repeat the procedure and add the reducer again. It is not recommended that more than 20% of the reducer be added. Don’t use it to add transparency to the paint. If you’re trying to make the paint more transparent, use resins such as 4004 for harder surfaces or 5601 for flexible or fabric surfaces. 4030 or 4050 UVLS clear is also a good choice for hard surfaces. Should I choose 4013 over 4011? We always recommend trying 4011 first as an official “go-to” reducer. If, for some reason, it does not satisfy your needs, feel free to reach out to SprayGunner’s Support Team so we can help you figure out your case and give recommendations. 4013 could be what you need, or perhaps 4020. In short, 4013 could be a better choice for small nozzle airbrush use, while 4020 is an additive for high-humidity environments. Made in the USA