AC Infinity Cloudcom Sensors
AC Infinity CLOUDCOM Smart Sensors – Bluetooth Thermo-Hygrometers for Temperature, Humidity & VPD Monitoring Monitor your growing environment with greater precision using the AC In finity CLOUDCOM Smart Sensor range, a series of Bluetooth-enabled thermo-hygrometers designed for accurate climate monitoring in grow tents, indoor gardens, propagation areas, greenhouses and other controlled environments. The CLOUDCOM range combines fast-refresh temperature and relative humidity monitoring with Bluetooth connectivity to the AC Infinity app, allowing growers to track environmental conditions, review historical data, configure alerts and identify climate fluctuations over time. Choose between the compact A-Series or the larger display-equipped B-Series, with either an integrated sensor or a 12ft remote probe depending on where you need to take measurements. CLOUDCOM Models Model Sensor Type Temperature Humidity VPD Display Bluetooth App CLOUDCOM A1 12ft Remote Probe Yes Yes App dependent Compact Yes CLOUDCOM A2 Integrated Yes Yes App dependent Compact Yes CLOUDCOM B1 12ft Remote Probe Yes Yes Yes Backlit LCD Yes CLOUDCOM B2 Integrated Yes Yes Yes Backlit LCD Yes The simplest way to choose is: A1 = Mini + Remote ProbeA2 = Mini + Built-In SensorB1 = Full Display + Remote ProbeB2 = Full Display + Built-In Sensor Key Features Smart temperature and humidity monitoring Bluetooth connectivity AC Infinity app integration Fast-refresh environmental readings Daily high and low climate tracking Historical environmental data Custom climate alerts Data graphs for identifying environmental trends CSV data export through the app Temperature and humidity calibration options Compact battery-powered design Suitable for grow tents and indoor gardens Remote-probe and integrated-sensor models available B-Series provides dedicated VPD monitoring B-Series features a large backlit LCD Useful as a standalone environmental monitor without requiring a complete UIS controller system Why Monitor Temperature & Humidity? Temperature and relative humidity are two of the most important environmental measurements in controlled-environment growing. Changes in either can affect: Plant transpiration Water uptake Nutrient movement Root-zone demand Growth rate Environmental stress Condensation Mould and disease pressure Overall climate stability A CLOUDCOM sensor gives growers a dedicated reference point for monitoring these conditions rather than relying solely on the settings of ventilation, heating or humidification equipment. VPD Monitoring with CLOUDCOM B1 & B2 The CLOUDCOM B-Series adds Vapor Pressure Deficit monitoring, making the B1 and B2 particularly useful for growers wanting more detailed environmental information. VPD considers the relationship between temperature and humidity rather than treating the two measurements independently. This can provide a more useful indication of the drying pressure surrounding the plant canopy and help growers understand whether conditions are encouraging excessive or insufficient transpiration. Instead of simply seeing: Temperature: 26°C and Humidity: 60% RH VPD gives you an additional environmental metric that can be monitored as the crop develops. This makes the CLOUDCOM B-Series particularly attractive for growers managing environmental conditions through propagation, vegetative growth and flowering. AC Infinity App Connectivity Connect your CLOUDCOM sensor to the AC Infinity app via Bluetooth to turn it into a more powerful environmental monitoring tool. Depending on model and supported functions, app connectivity provides access to features including: Current climate readings Historical temperature data Historical humidity data VPD information on supported models Climate trend graphs Custom alarms Push notifications Reading calibration Data logging CSV data export Historical information is especially useful because environmental problems don't always occur while you're standing in front of the grow tent. A temperature spike during the lighting cycle or a humidity increase after lights-off can be identified later through recorded climate data. CLOUDCOM A1 – Mini Smart Sensor with 12ft Probe The CLOUDCOM A1 combines the compact A-Series format with an external 12ft / 3.66m sensor probe. This allows the monitoring unit and sensing point to be positioned separately. It's particularly useful where you want to place the sensor: At canopy height Inside a grow tent Inside a propagation space Near an intake or exhaust area In another specific climate zone while keeping the main unit somewhere easier to access. Best For Growers wanting a compact remote climate sensor without requiring the larger B-Series display. CLOUDCOM A2 – Mini Smart Sensor with Integrated Sensor The CLOUDCOM A2 places its temperature and humidity sensor directly inside the compact unit. There is no long external probe to route. Simply position the device in the area you want to monitor and connect it to the app. Its small footprint makes the A2 particularly useful for: Small grow tents Propagation areas Clone spaces Cabinets Drying areas Environmental spot monitoring Multiple-zone monitoring Best For Growers wanting a small, simple Bluetooth temperature and humidity monitor that can be positioned directly inside the growing environment. CLOUDCOM B1 – Smart VPD Thermo-Hygrometer with 12ft Probe The CLOUDCOM B1 is the remote-probe option in the larger B-Series. It features a 12ft / 3.66m corded sensor probe, allowing environmental measurements to be taken remotely from the main display. The large backlit LCD provides easy access to climate information while the probe can be positioned exactly where the measurement is most useful. The B1 monitors: Temperature Relative humidity VPD Daily high and low readings Climate trends Why Choose the B1? The remote sensor arrangement is particularly useful in a grow tent because the display does not necessarily have to sit at the same location as the sensor. The probe can be positioned around canopy level while the display remains somewhere convenient to read. Best For Growers wanting VPD monitoring, a large display and precise remote sensor placement. CLOUDCOM B2 – Smart VPD Thermo-Hygrometer with Integrated Sensor The CLOUDCOM B2 provides the B-Series display and smart monitoring features but uses a built-in environmental sensor instead of a corded probe. Position the entire unit in the area being monitored and it can provide temperature, relative humidity and VPD information directly from that location. Its backlit LCD can be used for quick visual checks, while Bluetooth connectivity provides deeper environmental information through the app. Mounting Options The B2 can be positioned using: Desktop placement Wall mounting Magnetic mounting This makes it easy to position inside or around a controlled growing environment. Best For Growers wanting a self-contained VPD, temperature and humidity monitor with a large display and no external probe cable. B1 vs B2 – Which Should I Choose? The key difference is where the sensor is located. Choose CLOUDCOM B1 If: You want the sensor and display in different locations. For example: Probe at canopy level → Display outside or higher in the tent This makes the B1 particularly useful for precise spot monitoring. Choose CLOUDCOM B2 If: You want a clean, self-contained unit with no external sensor cable. Simply position the B2 where you want to measure the environment. A-Series vs B-Series The A-Series prioritises compact size and straightforward climate monitoring. The B-Series is the better option when you want a larger physical display and more comprehensive VPD-focused environmental monitoring. For many indoor growers: A-Series = compact secondary/zone sensor B-Series = primary environmental monitor Using multiple CLOUDCOM sensors can also help identify environmental differences between separate tents, propagation areas or different positions within a larger growing space. Specifications Specification CLOUDCOM B1 CLOUDCOM B2 Model AC-CCB1 AC-CCB2 Sensor 12ft Remote Integrated Temperature Detection 16–194°F 16–194°F Humidity Detection 0–100% RH 0–100% RH Operating Temperature 14–122°F 14–122°F Operating Humidity 35–85% RH 35–85% RH VPD Monitoring Yes Yes Display Backlit LCD Backlit LCD Unit Dimensions 7.3 × 8.4 × 2.5cm 7.3 × 8.4 × 2.5cm Display Size 5.74 × 5.64cm 5.74 × 5.64cm Probe Length 3.66m / 12ft Integrated Bluetooth Yes Yes App Connectivity Yes Yes Ideal Applications AC Infinity CLOUDCOM Smart Sensors are well suited to: Indoor grow tents Grow rooms Propagation tents Seedling areas Clone stations Greenhouses Drying environments Climate-controlled storage Environmental testing Multiple-zone grow rooms General indoor climate monitoring Sensor Placement Tips For representative grow-space measurements, avoid positioning the sensor directly against a grow light, humidifier outlet, heater, intake fan or exhaust opening unless you specifically want to measure that microclimate. For canopy monitoring, position the sensing point around the plant canopy without allowing leaves to rest directly against the sensor. With the A1 and B1, the long remote probe makes this especially easy because the sensing point can be moved independently of the main unit. Why Choose AC Infinity CLOUDCOM? Good environmental control begins with good environmental data. The CLOUDCOM range gives growers an affordable way to monitor climate conditions without requiring a complete environmental controller installation. Choose a compact A-Series model for simple smart monitoring or step up to the B-Series for a larger display and dedicated VPD information. With Bluetooth app connectivity, environmental history, alarms, graphs and data export, CLOUDCOM can do considerably more than a conventional analogue thermometer and hygrometer. Frequently Asked Questions Does CLOUDCOM control my fan or humidifier? No. CLOUDCOM is primarily an environmental monitoring device, not a UIS equipment controller. It measures and records environmental conditions so you can monitor your grow space. For automated equipment control, use an appropriate AC Infinity environmental controller. Do I need an AC Infinity controller to use CLOUDCOM? No. CLOUDCOM is designed as a standalone smart climate monitor and can connect directly to the AC Infinity app via Bluetooth. Does CLOUDCOM require Wi-Fi? The CLOUDCOM thermo-hygrometer range uses Bluetooth connectivity for app pairing. It should not be confused with Wi-Fi-enabled AC Infinity environmental controllers. What does the CLOUDCOM measure? Depending on the selected model, CLOUDCOM monitors temperature, relative humidity and VPD. What is the difference between A1 and A2? The A1 uses a 12ft remote probe, while the A2 has an integrated sensor. What is the difference between B1 and B2? The B1 uses a 12ft remote sensor probe, while the B2 measures conditions using its integrated sensor. Both B-Series models feature a backlit LCD and VPD-focused climate monitoring. Which model is best for a grow tent? For precise canopy-level measurements, the B1 is an excellent choice because its remote probe can be positioned at canopy height while the display is mounted somewhere more convenient. For a simple all-in-one unit, choose the B2. Can I monitor multiple grow areas? Yes. Multiple smart thermo-hygrometers can be positioned in different environmental zones, making them useful for growers operating several tents or separate propagation and flowering areas. Can I export environmental data? Yes. Supported CLOUDCOM app functions include historical climate graphs and CSV data export, allowing environmental information to be analysed in greater detail. Can I calibrate the readings? The AC Infinity app provides calibration options for supported temperature, humidity and VPD readings. Is CLOUDCOM part of the UIS control system? CLOUDCOM should be viewed as a smart environmental monitoring product, rather than a UIS device controller. If you need equipment automation based on temperature, humidity or VPD, an appropriate AC Infinity controller is the better choice.
More you might like
Related
Jiffy Peat Pellets
Related
Jumbo Dome and Tray
Related
High Powered Organics Karanja Meal
Related