Stainless Steel CZ solitaire ring with channel set shoulders for your inclusions. Material: Stainless Steel Stone Size: 6mm Stone height: 6mm (from inside ring to top of stone). Inlay setting size: Approx. 2.5mm (at it's widest point) x 10mm. Please note that setting sizes may vary slightly depending on the ring size. Due to the nature of stainless steel, please be aware that it is normal to have very slight movement of the stone. If it is able to twist within the setting, this is ok and would not be considered a fault. Stainless steel is stronger than silver or gold, however the prongs can still work loose over time if not properly cared for. I will personally fill the channels with your inclusion and chosen colour. Please note colours can vary and cannot be exactly replicated due to many factors including differences in screens and then again in person/natural light. Cremains themselves also vary greatly in colour and again can affect the overall colour/finish. This is one of the many reasons that make it so unique and special! Ring size Please take care to order the correct size, as rings cannot be resized once they have been made. Please note that due to sizing mandrel tolerances, how far the ring is placed on the sizer, the sizing method used, and how the sizer is read, finished rings may vary by up to one UK ring size (approximately half a US size) either smaller or larger than requested All sizes are approximate and settings with pave set stones are recommended for occasional wear only. Please see my FAQ's for any questions you may have.
