EXPERT Clean Up is a concentrated degreaser that lifts oil-based stain off concrete, brick, siding and other surfaces. Spray it on before you stain to make clean-up easier, and on any spill right away. Mix 4 parts water to 1 part Clean Up, so one gallon makes 5 gallons. Use it straight on tough spills on concrete and brick. It is orange, so you can tell it apart from the other EXPERT products.On the job Lifts oil-based stain spills and overspray off concrete, brick and siding Spray it on before staining to make clean-up easier Mix 4 parts water to 1 part Clean Up. One gallon makes 5 gallons Use it straight on tough spills on concrete and brick Treat spills right away for the best results Orange, with a pour spout How to use it Shake well. Mix 4 parts water with 1 part Clean Up in a pump sprayer. Keep a little straight Clean Up on hand for tough spills. Test a small spot first, especially on painted surfaces. Before you stain, spray concrete, brick, siding, windows and vehicles near the work. If stain lands where it should not, spray Clean Up on it right away. Use it straight on concrete and brick. Rinse with water. Clean tools with soap and water right after use. Specs Form: Liquid concentrate Mix: 4 parts water to 1 part Clean Up Makes: 5 gallons of mix per gallon Color: Orange Apply with: Pump sprayer Shelf life: 36 months unopened. Keep the cap tight Storage: Room temperature, in the original container Sizes: 1 gallon (128 oz), 5 gallon Good to know Use care on painted surfaces. It can damage or discolor them. Test first. The EXPERT Stain & Seal instructions call for a degreaser to clean up spills. This is the one. Safety Wear heavy-duty rubber gloves, eye protection and a NIOSH-approved respirator. Keep out of reach of children. Do not swallow. On eyes or skin, rinse with water for 15 minutes. If irritation continues, get medical help. Do not mix with other chemicals. Read the Safety Data Sheet before use. OrderingOrder from Stain & Seal Supply, an authorized EXPERT dealer. Orders placed before 2 p.m. Central ship the same day, Monday to Friday.Questions? Call 615-785-1861, 7 a.m. to 7 p.m. Central, Monday to Friday.DocumentsSafety Data SheetCommon questionsHow do I get oil-based stain off concrete?Spray EXPERT Clean Up on it right away. Use it straight on tough spills. Then rinse with water.How do I mix it?4 parts water to 1 part Clean Up. One gallon makes 5 gallons.Can I use it before staining?Yes. Spray concrete, brick, siding, windows and vehicles near the work first. It makes clean-up easier.Is it safe on painted surfaces?Use care. It can damage or discolor paint. Test a small spot first.Does it work on EXPERT Stain & Seal spills?Yes. The EXPERT Stain & Seal instructions call for a degreaser to clean up spills.