DESCRIPTION The Flex Sensor is a resistive bend sensor that measures the amount of deflection or bending, making it a favourite among Singapore's maker community for wearable electronics, robotic joints, and DIY human-interface controllers. As the sensor flexes, its internal resistance increases in proportion to the bend angle, giving a simple analogue signal that microcontrollers such as Arduino and Raspberry Pi can read directly. Its low-profile, solder-tab design makes it easy to integrate into gloves, prosthetics, and other compact IoT and robotics projects where a slim sensing element is needed. FEATURES Resistance increases as the sensor bends, and returns to baseline as it flattens Flat resistance rising to at least 2x when bent to 180° Low-profile construction at just 0.43mm thick Solder tab connector for direct wiring or ribbon cable Rated for over 1 million bend cycles Wide operating temperature range of -35°C to +80°C APPLICATIONS Wearable electronics and smart gloves Robotic joint and finger angle sensing Rehabilitation and motion-tracking devices DIY game controllers and human-interface projects Educational demonstrations of variable resistance TECHNICAL DETAILS Flex Sensor 2.2" Active Length: 55.37mm (2.18") Total Length: 73.66mm (2.90") Height: 0.43mm Flat Resistance: 200kΩ–1mΩ (±30%) Bend Resistance: ≥2x flat resistance at 180° pinch bend Power Rating: 0.5W continuous, 1W peak Operating Temperature: -35°C to +80°C Life Cycle: greater than 1 million cycles Connector: Solder tab Flex Sensor 4.5" Total Length: 112.24mm (4.419") Sensing/Flex Length: 95.25mm (3.750") Width: approx. 6.35mm (0.250")* Thickness: 0.43mm (0.017") Flat Resistance: 10,000Ω (10kΩ) Resistance Tolerance: ±30% Bend Resistance Range: 10kΩ–15kΩ Power Rating: 0.50W continuous, 1W peak Operating Temperature: -35°C to +80°C Life Cycle: greater than 1,000,000 flex cycles Termination: Solder tab SHIPPING LIST 1x Flex Sensor