Gun Metal is a solid, deep charcoal-gray metallic with no pattern and an industrial edge. Recommended base coat: Black or dark grey Fabric: Works on fabric. Pair it with a fabric adhesive. Release: Standard release. Give it some extra scrubbing before you peel so the foil fully lets go of the carrier sheet. Toner-reactive: also works for toner foiling with laser-printed designs. How to use it Apply one thin, even coat of ArtsSyVille Foil Adhesive and allow it to dry to a firm tack before applying foil. Drying times vary by surface. Paper crafts and wood cutouts may be ready in 15–30 minutes, while furniture and painted surfaces generally need 2–4 hours or longer. For hats and tumblers, overnight drying is recommended. Always check the tack before foiling. The adhesive should feel sticky, not wet. When in doubt, allow additional drying time for best results. Then lay the foil pattern side up, rub it down, and peel. On fabric, use FABRIC Foil Adhesive instead. For complete application instructions, visit our ArtsSyVille Foil Adhesive product page. New to foiling? Jenn's free tutorials walk you through your first transfer. Sizes Cut to order: by the foot (12 × 12 in.); 12-inch rolls of 3, 15 and 100 ft; 24-inch wide rolls of 100 and 200 ft. Ordering by the foot? A quantity of 2 gets you one 2-foot piece. By-the-foot foils aren't individually labeled.
