HTVB-50 is a compact high-temperature vibration ball mill with a gas delivery reactor, which can be heated up to 500ºC with a programmable temperature controller with accuracy +/- 1.0 ºC. It is an excellent tool for Mechanochemical activation of catalysts for CO2 methanationFor more applications using a ball mill, please review the article at https://doi.org/10.1002/anie.201810902 Specifications: Power 110 - 220 VAC, single phase 50/60 Hz 1 kW max Heatable Reactor(Milling Chamber) The reactor is made of SS 304 with 55mm ID × 61mm OD × 100 mm Depth Maximum material capacity: 200ml (Including balls and material) The heating ring is on outside the reactor, which can be heated up to 500 ºC Precision and programmable temperature control with +/- 1°C accuracy Gas inlet and outlet (1/8") with valves are built into the reactor A 1/4" thermocouple feedthrough is installed on the flange (Thermocouple is not included) The reactor is installed on the vibration stage Max. The working pressure is 0.3 MPa. ( You must use a two-stage gas regulator to limit max. pressure from the gas cylinder ) Max gas flow rate: < 5L/minute Flange connection: 8 - M8 x 18mm Extra Copper Gaskets are available at the link below: https://www.mtixtl.com/61mmO.DCopperGasketforConflatFlangeofOTF-1200X-HP-30A-EQ-ORing-Cu.aspx Working Temp & Pressure Standard: 3 bar Max. @ 500ºC Max. Optional: 20 bar Max. @ 250ºC Max. at extra cost 10 bar Max. @ 350ºC Max. at the extra cost Vibration Stage The vibration stage is driven by a 24V DC motor The vibration speed is adjustable in terms of motor rotational speed 400 - 2000 RPM (6 - 33 Hz) Max. Load: 20Kg Milling Balls A set of stainless steel milling balls (6 - 20 mm) is included. Please click here to order additional stainless steel balls. Please click here to order additional YSZ balls. Control Unit The control unit is separated from the reactor. The unit controls both temperature and vibration speed. Compliance CE certified NRTL certification is available upon request at the extra cost