The iBasso AMP17 is a balanced headphone amplifier card for select iBasso players. Its discrete Class AB circuit combines gallium nitride (GaN) FETs with transistors, and gives headphones and external amplifiers their own 4.4 mm outputs. Check your player: Fits the DX340, DX320, DX320 Edition X and DX300 with compatible firmware. The external 12 V Super Gain mode is for the DX340 only. Dedicated 4.4 mm balanced headphone output (PO) and 4.4 mm balanced line output (LO). Up to 1,030 mW per channel into 32 Ω on battery power. Up to 1,900 mW per channel into 32 Ω with 12 V external power and Super Gain on the DX340. 1.1 Ω headphone output impedance and three selectable line-out levels. Which iBasso Players Work with AMP17? Player Compatibility DX340 Supported on battery power and with the DX340’s 12 V adapter for Super Gain. Android firmware V1.05 introduced AMP17 support. DX300, DX320 and DX320 Edition X Supported on battery power with AMP17-compatible firmware. Do not use the 12 V input with these players. DX300MAX, DX320MAX, DX340MAX and other iBasso players Not listed as compatible. The DX340 and DX340MAX are different players. Update your player to the latest compatible firmware before swapping cards. Shut the player down and disconnect the power adapter before removing or installing the card. Headphone Out or Line Out? 4.4 mm Headphone Out (PO) Use the jack marked PO for headphones or IEMs with a 4.4 mm balanced cable. Start in low gain with sensitive IEMs. On the DX340, the external 12 V adapter and Super Gain give more headroom for demanding headphones. 4.4 mm Line Out (LO) Use the jack marked LO to send a balanced analog signal to an external headphone amp or preamp. Pick the line level that suits the input of your amplifier. The LO jack is not a headphone output. Both sockets are balanced. If your headphones use a 3.5 mm single-ended plug, keep a card with a matching headphone output or use a compatible balanced cable for headphones wired to accept one. Technical Specifications 4.4 mm Balanced Headphone Output Amplifier circuit Discrete balanced Class AB with GaN FETs and transistors Output power into 32 Ω 1,030 mW per channel on battery; 1,900 mW per channel with 12 V external power and Super Gain (DX340 only) Output impedance 1.1 Ω Frequency response 10 Hz–40 kHz (±0.5 dB) THD+N −116 dB (no load); −110 dB (600 Ω load) Dynamic range 120 dB Signal-to-noise ratio 122 dB Crosstalk −117 dB 4.4 mm Balanced Line Output Output level by gain 1.6 Vrms (low); 2.6 Vrms (mid); 3.0 Vrms (high) THD+N −116 dB (no load) Dynamic range 126 dB Signal-to-noise ratio 123 dB Crosstalk −97 dB What's Included iBasso AMP17 balanced headphone amplifier card Protective storage case Installation screwdriver and screws Warranty card User Manual & Firmware Download the iBasso DX340 Player Manual (PDF) The player manual covers DX340 operation; its output specs are for the stock card, not AMP17. For updates, see DX340 firmware or iBasso downloads for other players. Independent Review AMP17 vs. AMP15 and AMP16: Late Night Unboxing Watch this review on YouTube (opens in a new tab)