HPE Aruba Networking 2930F JL255A 24-Port PoE+ 370 W Switch with 4x 1G/10G SFP+

Network Devices Inc. Verified independent store

→

[shortdesc] Managed, Rack-mountable, 24 x 1G PoE+ ports, 4 x 1G/10G SFP+ Uplinks, PoE+ (370W), Layer 3 [/shortdesc] [properties] Properties HPE Aruba Networking 2930F 24G PoE+ 4SFP + Switch (JL255A) Description Switch, L3, managed, 24 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink), rack-mountable, PoE+ (370 W) Product Family 2930F Series Product Type Ethernet Switch I/O ports and slots 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports; PHY-less Additional ports and slots 1 dual-personality (RJ-45 or USB micro-B) serial console port Electrical characteristics Frequency 50/60 Hz Voltage 100 - 127 / 200 - 240 VAC, rated Current 4.9/2.4 A Maximum heat dissipation 258.0 BTU/hr (272.2 kj/hr) Maximum power rating 445 W Idle power 36.8 W PoE power 370 W PoE+ Dimensions 17.42 (w) x 11.98 (d) x 1.73 (h) in (44.25 x 30.42 x 4.39 cm) (1U height) Weight 8.6 lb (3.9 kg) Power efficiency certifications 80plus.org certification: Silver [/properties] [specifications] Specifications 2930F-JL255A Memory and processor Dual Core ARM Cortex A9 @ 1016 MHz, 1 GB DDR3 SDRAM; Packet buffer size: 12.38 MB 4.5 MB Ingress/7.875 MB Egress,4 GB eMMC Performance 1000 Mb Latency < 3.8 ¼s (64-byte packets) 10 Gbps Latency < 1.6 ¼s (64-byte packets) Throughput up to 95.2 Mpps Switching capacity 128 Gbps Routing table size 2,000 IPv4, 1,000 IPv6 in hardware,200 OSPF, 256 Static, 10,000 RIP MAC address table size 32,768 entries Management HPE Aruba Networking Management Software (AirWave)Central Network ManagementIMC - Intelligent Management CenterCommand-line interfaceWeb browserConfiguration menuSNMP managerTelnetRMON1FTPOut-of-band management (serial RS-232C or micro USB) Operating temperature 32°F to 113°F (0°C to 45°C); up to 5,000 Feet,0°C to 40°C (32°F to 104°F) up to 10,000 Feet Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity 15% to 95% @ 149°F (65°C), noncondensing Airflow direction Side-to-side Acoustic Power: 54.1 dB, Pressure: 40.6 dB Safety UL 60950-1: 2nd Edition;UL 62368-1: 2nd Edition;EN 60950-1:2006 +A11:2009+A1:2010 +A12:2011+A2:2013;EN 62368-1: 2nd Edition;IEC 60950-1:2005 +A1:2009+A2:2013; CSA 22.2 No. 60950-1-072nd; IEC-62368-1: 2nd Edition;EN 60825-1:2014 / IEC 60825- 1:2014 Class 1 Emissions EN 55032:2012/CISPR 32 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438 Immunity EN 55024, CISPR 24IEC 61000-4-2IEC 61000-4-3IEC 61000-4-4IEC 61000-4-5IEC 61000-4-6IEC 61000-4-8IEC 61000-4-11EN 61000-3-2, IEC 61000-3-2EN 61000-3-3, IEC 61000-3-3 ENHANCED FEATURES Software-defined networks Supports REST APIs to enable automation of networkoperations, monitoring, and troubleshooting Unified Wired and Wireless Supports unified wired and wireless policies using Aruba ClearPass Policy ManagerSwitch auto-configuration automatically configuresswitches for different settings such as VLAN, CoS, PoEmax power, and PoE priority when an Aruba access pointis detectedUser Role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switchbased local user role or download from ClearPassStatic IP Visibility allows ClearPass to do accounting forclients with static IP address Quality of Service (QoS) Traffic prioritization (IEEE 802.1p) allows real-timetraffic classification into eight priority levels mapped toeight queuesLayer 4 prioritization based on TCP/UDP port numbersClass of service (CoS) sets the IEEE 802.1p priority tagbased on IP address, IP Type of Service (ToS), Layer 3protocol, TCP/UDP port number, source port, and DiffServRate limiting sets per-port ingress enforced maximumsand per-port, per-queue minimumsLarge buffers provide graceful congestion management Connectivity Flexible 10 Gbps Ethernet with four built-in 10 Gigabitports (SFP+)Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 portsIEEE 802.3at Power over Ethernet (PoE+) provides up to30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless accesspoints, and security cameras, as well as any IEEE 802.3afcompliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deploymentsPre-standard PoE support detects and provides power topre-standard PoE devicesIPv6:- IPv6 host Enables switches to be managed in an IPv6 network- Dual stack (IPv4 and IPv6) Transitions from IPv4 to IPv6,supporting connectivity for both protocols- MLD snooping Forwards IPv6 multicast traffic to theappropriate interface- IPv6 ACL/QoS Supports ACL and QoS for IPv6network traffic- IPv6 routing Supports static and RIPng protocols- Security Provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping Performance and Efficiency The energy-efficient design delivers power savings:- 80 PLUS Silver Certified power supply increasesefficiency and savings- Energy-efficient Ethernet (EEE) support reduces powerconsumption in accordance with IEEE 802.3azDesigned with the latest ProVision ASIC, providing very low latency, increased packet buffering, and adaptive power consumptionSelectable queue configurations allow for increasedperformance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications Convergence IP multicast snooping and IGMP automatically prevent flooding of IP multicast trafficIEEE 802.1AB Link Layer Discovery Protocol (LLDP) facilitates easy mapping using network management applications with LLDP automated device discovery protocolLLDP-MED (Media Endpoint Discovery) defines a standardextension of LLDP that stores values for parameters suchas QoS and VLAN to configure automatically network devices such as IP phonesPoE and PoE+ allocations support multiple methods(automatic, IEEE 802.3at dynamic, LLDP-MED fine grain,IEEE 802.3af device class, or user-specified) to allocateand manage PoE and PoE+ power for more efficientenergy savingsLocal MAC Authentication assigns attributes such as VLAN and QoS using a locally configured profile that can be a list of MAC prefixes Resiliency and high availability IEEE 802.1s Multiple Spanning Tree provides high link availability by allowing multiple spanning trees; provideslegacy support for IEEE 802.1d and IEEE 802.1wIEEE 802.3ad link-aggregation-control protocol (LACP) and port trunking support up to 26 static, dynamic, or distributed trunks, with each trunk having up to eight links (ports) per static trunkSmartLink provides easy-to-configure link redundancy ofactive and standby links Simplified Configuration and Management SNMPv1, v2, and v3 provide complete support of SNMP;support of industry-standard Management Information Base (MIB) plus private extensions; SNMPv3 supports increased security using encryptionZero-Touch Provisioning (ZTP) simplifies installation of the switch using Aruba Activate or a DHCP-based process with AirWave Network ManagementFlexible management with same hardware Supports both cloud-based Central and on-premise AirWave without ripping and replacing switching infrastructureAruba Central cloud-based management platform offers aa simple, secure, and cost-effective way to manage switches Manageability Dual flash images provide independent primary and secondary operating system files for backup while upgradingFriendly port names allow the assignment of descriptive names to portsFind-Fix-Inform finds and fixes common network problems automatically, then informs the administratorMultiple configuration files allow multiple configuration files to be stored in a flash imageSoftware updates free downloads from the WebRMON, XRMON, and sFlow® provide advanced monitoringand reporting capabilities for statistics, history, alarms, and eventsTroubleshooting ingress and egress port monitoring enable more efficient problem solvingUnidirectional link detection (UDLD) monitors the linkbetween two switches and blocks the ports on both endsof the link if the link goes down at any point between thetwo devices Layer 2 switching VLAN support and tagging support IEEE 802.1Q (4,094 VLAN IDs) and 512 VLANs simultaneouslyJumbo packet support improves the performance of largedata transfers; supports frame size of up to 9,220 bytesIEEE 802.1v protocol VLANs isolate select non-IPv4 protocols automatically into their own VLANsRapid per-VLAN spanning tree (RPVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+GVRP and MVRP allow automatic learning and dynamic assignment of VLANs Layer 3 services DHCP server centralizes and reduces the cost of IPv4 address management Layer 3 routing Static IP routing provides manually configured routing; includes ECMP capability256 static and 2,000 RIP routes facilitate the segregation of user data, without adding external hardwareRouting Information Protocol (RIP) provides RIPv1, RIPv2, and RIPng routing Security Multiple user authentication methods:- Uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards- Supports web-based authentication- Supports MAC-based authenticationAuthentication flexibility- Multiple IEEE 802.1X users per port provides authentication of multiple devices on a single port;prevents a user from piggybacking on another users IEEE 802.1X authentication- Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port switch port will accept up to 32 sessions of IEEE 802.1X, Web, and MAC authenticationsAccess control lists (ACLs) provide IP Layer 3 filtering based on source and destination IP address or subnet and source and destination TCP/UDP port numberSource-port filtering allows only specified ports to communicate with each otherRADIUS/TACACS+ eases switch management security administration by using a password authentication serverSecure shell encrypts all transmitted data for secure remote CLI access over IP networksSecure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switchPort security allows access only to specified MAC addresses, which can be learned or specified by the administratorMAC address lockout prevents particular configured MAC addresses from connecting to the networkSecure FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration fileSwitch management logon security helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authenticationCustom banner displays security policy when users log in to the switchSTP BPDU port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacksDHCP protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacksDynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network dataDynamic IP lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofingSTP root guard protects the root bridge from malicious attacks or configuration mistakesIdentity-driven ACL enables the implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network userPer-port broadcast throttling configures broadcast control selectively on heavy traffic port uplinksMonitor and diagnostics digital optical monitoring of SFP+ and 1000BASE-T transceivers allow detailed monitoring of the transceiver settings and parameters [/specifications] [accesories] Transceivers J9054D Aruba 100M SFP LC FX 2km MMF XCVR J9054DCM Aruba CM 100M SFP LC FX 2km MMF XCVR J4858D Aruba 1G SFP LC SX 500m MMF XCVR J4858DCM Aruba CM 1G SFP LC SX 500m MMF XCVR J4859D Aruba 1G SFP LC LX 10km SMF XCVR J4859DCM Aruba CM 1G SFP LC LX 10km SMF XCVR J4860D Aruba 1G SFP LC LH 70km SMF XCVR J4860DCM Aruba CM 1G SFP LC LH 70km SMF XCVR J8177D Aruba 1G SFP RJ45 T 100m Cat5e XCVR J8177DCM Aruba CM 1G SFP RJ45 T 100m Cat5e XCVR J9150D Aruba 10G SFP+ LC SR 300m MMF XCVR J9150DCM Aruba CM 10G SFP+ LC SR 300m MMF XCVR J9151E Aruba 10G SFP+ LC LR 10km SMF XCVR J9151ECM Aruba CM 10G SFP+ LC LR 10km SMF XCVR J9153D Aruba 10G SFP+ LC ER 40km SMF XCVR J9281D Aruba 10G SFP+ to SFP+ 1m DAC Cable J9283D Aruba 10G SFP+ to SFP+ 3m DAC Cable Note: 2930F Series Switches do not support the use of10G LRM, nor 7M 10G DAC Cables JL448A Aruba X2C2 RJ45 to DB9 Console Cable Mounting Kit (for 24 and 48 port models) J9583A HPE X410 1U Universal 4-post Rack Mounting Kit J9583B Aruba X414 1U Universal 4-post Rack Mounting Kit Accessories for 8 port PoE+ model (JL258A) JL311A Aruba 2930F 8-port Cable Guard JL311ACM Aruba CM 2930F 8-port Cable Guard JL312A Aruba 2930F 8-port Power Shelf JL312ACM Aruba CM 2930F 8-port Power Shelf Aruba Central Foundation Licenses Q9Y73AAE Aruba Central Switch 6200/29xx Foundation 1-year Subscription E-STU Q9Y74AAE Aruba Central Switch 6200/29xx Foundation 3-year Subscription E-STU Q9Y75AAE Aruba Central Switch 6200/29xx Foundation 5-year Subscription E-STU Q9Y76AAE Aruba Central Switch 6200/29xx Foundation 7-year Subscription E-STU Q9Y77AAE Aruba Central Switch 6200/29xx Foundation 10-year Subscription E-STU Q9Y68AAE Aruba Central 25xx/6100/8 to 12 port Switch Foundation 1 year Subscription E-STU Q9Y69AAE Aruba Central 25xx/6100/8 to 12 port Switch Foundation 3-year Subscription E-STU Q9Y70AAE Aruba Central 25xx/6100/8 to 12 port Switch Foundation 5-year Subscription E-STU Q9Y71AAE Aruba Central 25xx/6100/8 to 12 port Switch Foundation 7-year Subscription E-STU Q9Y72AAE Aruba Central 25xx/6100/8 to 12 port Switch Foundation 10-year Subscription E-STU R6U78AAE Aruba Central On-Premises 62xx or 29xx SwitchFoundation 1-year Subscription E-STU R6U79AAE Aruba Central On-Premises 62xx or 29xx SwitchFoundation 3-year Subscription E-STU R6U80AAE Aruba Central On-Premises 62xx or 29xx SwitchFoundation 5-year Subscription E-STU R6U81AAE Aruba Central On-Premises 62xx or 29xx SwitchFoundation 7-year Subscription E-STU R6U82AAE Aruba Central On-Premises 62xx or 29xx SwitchFoundation 10-year Subscription E-STU R6U73AAE Aruba Central On-Premises 25xx/6100/8 to 12 port Switch Foundation 1 year Subscription E-STU R6U74AAE Aruba Central On-Premises 25xx/6100/8 to 12 port Switch Foundation 3-year Subscription E-STU R6U75AAE Aruba Central On-Premises 25xx/6100/8 to 12 port Switch Foundation 5-year Subscription E-STU R6U76AAE Aruba Central On-Premises 25xx/6100/8 to 12 port Switch Foundation 7-year Subscription E-STU R6U77AAE Aruba Central On-Premises 25xx/6100/8 to 12 port Switch Foundation 10-year Subscription E-STU [/accesories] HPE Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) The HPE Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) is a high-performance, scalable switch designed to power and connect devices in modern enterprise networks. With 24 Gigabit PoE+ ports, this switch delivers both power and data connectivity to devices such as IP phones, cameras, and wireless access points. It also features 4 SFP+ uplink ports for 10 Gigabit fiber connectivity, ensuring network scalability and redundancy. The Aruba 2930F series supports advanced Layer 2 and Layer 3 features, including traffic management, routing, and security, making it ideal for campus, branch, and SMB networks. Key Features: 24 x Gigabit PoE+ Ports: Delivers power and data connectivity for PoE-enabled devices, eliminating the need for separate power supplies. 4 x SFP+ Uplink Ports: Supports 10 Gigabit fiber uplinks for scalable and high-speed network expansion. Advanced Layer 2 and Layer 3 Features: Includes VLANs, QoS, static routing, and security features, providing optimized traffic management and secure network operations. Energy-Efficient Design: Supports Energy Efficient Ethernet (EEE) and PoE+ power management to reduce energy consumption and operational costs. Simple Management: Managed via Aruba Central, CLI, SNMP, or web-based GUI for easy control and monitoring of the network. Technical Overview: Recommended for: Enterprise and SMB networks needing PoE+ support and high-speed fiber uplinks for scalable deployment. Ports: 24 x Gigabit PoE+ ports, 4 x SFP+ uplink ports for 10 Gigabit connectivity. Power: Supports PoE+ with a power budget of up to 370W for powering connected devices. Management: Managed via Aruba Central, CLI, SNMP, and web-based GUI for comprehensive network control. Form Factor: Compact, rack-mountable design for efficient deployment in space-constrained environments. You can check the related tab for the HPE Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) datasheet. Show more