Kinvent K-Pull
Traction Dynamometer Kinvent K-Pull The Kinvent K-Pull is a wireless traction dynamometer that measures pulling force: the sensor sits in line between an anchor point and a strap, handle or band, and whatever the athlete pulls against it registers as tensile force. High-precision sensors record isometric and dynamic force production up to 300 kg (661 lb), and the reading lands in the Kinvent app as it happens. The sensor weighs 150 g and works in the Kinvent app, which runs on a yearly license. Loading through an anchor keeps the tester out of the load path. Nobody has to brace the device by hand, so the ceiling on the number belongs to the athlete rather than to whoever is holding the sensor. Traction suits the hip, thigh and trunk muscles. Maximum load 300 kg 661 lb in traction Accuracy Under 0.1% C3 accuracy class Weight 150 g Sensor only Battery 12 h Recharges in two hours Anchor To Athlete How it works An anchored line lets the sensor read both held and moving pulls. High-precision force measurement Isometric covers the held effort with no joint movement; dynamic covers force through a moving rep. One sensor reports both, so a max test and a loaded exercise go into the same file, read 1000 times a second to within 0.1%. Isometric and dynamic Wireless design It links to a phone or tablet over Bluetooth, weighs 150 g and needs nothing plugged in during a session. Clinical, gym and on-field use are all in scope, and in practice the working kit is the sensor, the straps and a screen you already carry, with the link reaching 40 m. No cables Built for high load The unit is engineered to withstand high forces, built for repeatable measurements from one session to the next. High load capacity Versatile pull-based testing The K-Pull runs the isometric mid-thigh pull, a Premium protocol in the Kinvent app, the Nordic hamstring test, an Excellence protocol, and resisted strength exercises. The first two produce a peak from a maximal effort, and resisted work records dynamic force with the athlete moving under load. Move the anchor or change the strap length and the same device covers a different joint angle, and one unit serves lower limb, trunk and upper body positions. IMTP, Nordic, resisted work Where Pull Testing Fits Key features Strength monitoring Force output for athletes and rehab patients Rehabilitation Muscle recovery tracked by therapists and clinicians Performance Force data to refine strength programs Sports science Data for biomechanics and human performance research Rigging A Pull How to use it The Rig Anchored setup The sensor goes in series between a fixed point and whatever the athlete holds or braces against, and it reads the tension in that line. For a seated knee extension, a strap from the ankle runs through the sensor to the leg of the bench. Tensile force read along the line of pull Attempts stored against the athlete for later comparison Traction Anchored Any angle The Accessories Straps and bands Straps and bands connect the sensor between the athlete and the anchor. Run an ankle strap to an elastic resistance band anchored on a wall ladder and a prone leg curl on a treatment table becomes a measured test, because the hardware between the athlete and the anchor decides which joint you are testing. A treatment table, a gym rig or a squat cage all serve as the fixed point. Strap and band Prone leg curl Tension Through A Line How it compares Pick by the direction the force travels and the muscle groups you test most. The K-Pull reads tension through a line, and every Kinvent handheld sensor reports into the same app. K-Grip A wireless grip dynamometer for measuring and training grip strength. Up to 90 kg (198 lb) 170 g in the hand 1000 Hz sampling About 12 h of battery Shop the K-Grip You're Here K-Pull A traction dynamometer that measures pulling force in line with a strap or cable. Up to 300 kg (661 lb) 150 g 1000 Hz sampling About 12 h of battery Currently viewing K-Push A handheld dynamometer for isometric muscle strength tests, with the Twin Handle in the box. Up to 90 kg (198 lb) 370 g with the starter pillow 1000 Hz sampling About 12 h of battery Shop the K-Push K-Move An 18 g motion sensor for joint range of motion and movement tracking. 18 g 400 Hz sampling Range of motion in degrees About 12 h of battery Shop the K-Move K-Bubble An air-pressure sensor that reads squeeze and press force through an inflatable accessory. Up to 0.4 bar (5.8 PSI) 36 g 125 Hz sampling About 12 h of battery Shop the K-Bubble K-Myo A wireless surface EMG sensor that records muscle activity on two channels. Two channels per sensor 1000 Hz sampling 30 g About 12 h of battery Shop the K-Myo Pulling Force On Record Frequently asked questions What kind of force does the K-Pull measure?+ It measures tensile force, the force in traction along the line the sensor sits in, for both isometric and dynamic efforts. Which test protocols does it support?+ The isometric mid-thigh pull, the Nordic hamstring test and resisted strength exercises. For the mid-thigh pull the sensor is anchored low with the athlete in a pulling position, and for the Nordic test it runs in line at the ankle. Anything else you can rig between a fixed point and an athlete works on the same principle, since the sensor reads whatever tension runs through the line. In the Kinvent app the packaged mid-thigh pull protocol comes with Premium and Excellence, and the Nordic test with Excellence. How much load can the K-Pull take, and how accurate is it?+ It is built for loads up to 300 kg (661 lb), with an accuracy better than 0.1%, rated C3 accuracy class, sampled at 1000 Hz. How long does the battery last?+ Roughly 12 hours between charges, and two hours on a USB-C lead brings it back to full. It runs with no mains lead during use, and away from the clinic the practical limit is a fixed point strong enough to anchor to. What comes in the box?+ The K-Pull with an accessory pack of two carabiners, two loop fasteners, two resistance bands and a rigid strap, plus a medical-grade power adapter, a USB-C cable, quick start cards and the user manual. Can it show endurance and side-to-side differences as well as a maximum?+ Yes. Alongside the force peak from a maximal attempt, the app reports the average strength held across an effort of a length you set, and read against the same athlete's peak, that average tells you how much of their output survives the duration. Run paired positions on the same rig and the app holds both values, whether the pair is a left and a right or two positions in a ratio. Keep the anchor, strap length and body position identical between the two attempts and the comparison is worth reading. What do I need with it to run a session?+ A phone or tablet running the Kinvent app, and something solid to anchor against. The app gives objective measurement, real-time feedback and progress tracking, and a tester can tell a clean build from a jerked one before the attempt is banked. The Kinvent app runs on a license that renews automatically each year. Who uses the K-Pull?+ Physical therapists, sports performance staff, physicians, researchers, coaches and trainers use it, in clinics, gyms and on the field. K-Pull or K-Push for lower limb testing?+ Where the athlete can out-produce the person holding the device, traction is the better route, so hip and thigh work belongs on the K-Pull. The K-Push stays faster for the many positions where a handheld sensor is enough, and both report into the same app, with the results in one athlete profile either way. What warranty comes with the K-Pull?+ Kinvent covers it for one year from the date of purchase against defects in its electronics and mechanical components, with proof of purchase.
More you might like
Related
KINVENT K-PULL - PULL DYNAMOMETER
Related
Kinvent K-Pull
Related
Kinvent K-Pull
Related