Link CAN Lambda (CANLAM) Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug. The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well as allowing your ECU to make tuning adjustments on the fly. Being fully digital the CAN Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration. Box Contents CAN-Lambda deviceBosch LSU4.9 SensorDeutsch 4-Way Connector KitO2 Bung and Plug2 Large Stickers2 Small StickersQuick Start Guide Specifications1 x 4 pin male DTM connector (power/CAN)1 x 6 pin mating connector for LSU 4.9 Lambda sensorDimensionsEnclosure 60 x 26 x 15mmLead length 170mmWeight 70g Input VoltageController 7.5 - 20 VSensor 10.8 - 16.5 V Input CurrentController 100 mASensor Heater 8 A Operating Temp -20 - 100 deg.CSensor Bosch LSU4.9Sensing Range 0.67 - 10 lambda CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s
