The M5Stack Core2 ESP32 IoT Development Kit represents an advanced second-generation core device within the M5Stack ecosystem. It is powered by the ESP32-D0WDQ6-V3 dual-core processor, ensuring exceptional performance. Equipped with integrated Wi-Fi and Bluetooth, it features 16MB Flash memory and 8MB PSRAM, making it ideally suited for complex IoT applications, DIY electronics projects, and STEM educational purposes. This device comes with a 2.0-inch capacitive touchscreen (320x240), a 390mAh rechargeable lithium battery, and intelligent power management managed by the AXP192 PMU. Additional features include a USB Type-C port, Grove-compatible expansion, a TF card slot, and I2S audio functionality, which provide versatile opportunities for development. More functionalities consist of virtual programmable buttons, a 6-axis IMU, a real-time clock (RTC), a vibration motor, and a microphone, making this kit an all-encompassing solution for smart device development, prototyping, and other innovative applications. Getting Started Power On: Click the power button located on the left side. Power Off: Press and hold the power button for 6 seconds. Reset: Use the RST button located at the bottom. Driver Installation For proper functionality, download and install the appropriate USB drivers for your operating system from the official website.Note: The Core2 comes in two variants that utilize CP2104 or CH9102F USB chips. To ensure compatibility, make sure to install both drivers. Important Considerations Vibration Module Compatibility: The design of the vibration sensor differs between the M5Core2 and the M5 Base series. Avoid stacking them together. Touch Screen Accuracy: If you experience inconsistencies with edge touches, consider updating the screen firmware using the M5Tool. Included Items 1 × M5Stack Core2 ESP32 Device 1 × Type-C USB Cable (20cm) 1 × Hex Key Possible Applications IoT terminal controller STEM education tool DIY projects Smart home technology Specifications Resource Parameter ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, Bluetooth Flash Memory 16MB PSRAM 8MB Input Voltage 5V @ 500mA Interfaces Type-C x 1, GROVE (I2C + I/O + UART) x 1 Display 2.0" @ 320*240 ILI9342C Touch Sensor FT6336U Speaker 1W-092 LED Green power indicator Buttons Power button, RST button, 3 Virtual screen buttons Vibration Motor Included Microphone SPM1423 I2S Amplifier NS4168 6-axis IMU MPU6886 RTC BM8563 Power Management Unit AXP192 USB Chip Type CP2104/CH9102F (both chips offer identical functionalities) DC-DC Boost Converter SY7088 TF Card Slot Supports up to 16GB Battery 390mAh @ 3.7V Antenna 2.4G 3D antenna Operating Temperature Range 0°C to 60°C Base Screw Specification M3 hex socket countersunk head Reserved PCB Interfaces Battery interface (1.25mm-2P), USB interface (1.25mm-4P) Net Weight 52g Gross Weight 70g Dimensions 54 x 54 x 16mm Package Dimensions 75 x 60 x 20mm Casing Material Plastic (PC)
