Brand new Kit High Output Stator 200W + High-Performance CDI + External Ignition Coil Direct replacement to your original unit Plug-and-play, direct fit, easy installation All products shipped are tested *All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part. Brand new aftermarket High output Stator 200W Highest grade of lamination materials Highest grade of copper winding, resistant to 200 degrees Celsius 2 x 100W Connectors included Rubber grommet included We have even included the opposite connector (main harness side) as we know these are often melted / corroded/defective and a major cause of repetitive electrical issues. Brand new aftermarket CDI box Enhanced timing curve, increased rev limiter (approximately 1000 rpm) Higher grade of electronic components. The quality exceeds the OEM equipment Brand new aftermarket External Ignition Coil You must re-install your OEM spark plug cap(s) Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install. High output Stator 200W Dimensions: Interior diameter: 54 mm Exterior diameter: 115 mm Thickness: 15 mm Length of wires stator to grommet: 200 mm Length of wires grommet to plug: 700 mm Other specifications: Number of wires: 5 Number of plugs: 5 Number of pins: 3 Number of poles: 17 Wire to wire resistance: Alternator: White to Green = 0.4 ohms +-20% Alternator: Yellow to Red = 0.4 ohms +-20% Source: Black/Red to Green = 140 ohms +-20% High-performance CDI Box Dimensions: Height: 22mm Length: 66mm Width: 42mm Other specifications: Number of plugs: 2 Number of pins: 6
