Build your own double cutaway guitar with this blank body DIY kit, made for builders who want to cut the shape themselves. The body ships as an uncut rectangular slab, so you draw and cut the outline. The cavities are already done: neck pocket, the three pickup rout under the pickguard, the control area and the tremolo spring cavity. The mahogany neck arrives complete, with frets, dot inlays, a fitted nut and a shaped headstock whose six tuner holes are already drilled. You bring the saw, the sandpaper and the soldering iron. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) You cut the body outline yourself from a rectangular blank, so a bandsaw or jigsaw, rasps and sanding blocks are required The headstock is already shaped and its six tuner holes are drilled, so the neck needs finishing only You drill the output jack hole yourself once the body outline is cut The neck screws on with no glue and no clamps, but the tremolo bridge needs careful setup for tuning stability Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany Construction: Solid wood Type: Solid Cutaway: Double Binding: None Top: None (plain wood, no veneer) Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Truss Rod Adjustment: Headstock Scale Length: 648 mm / 25.5" Binding: None Fretboard Material: Rosewood Radius: 14" / 356 mm Number of Frets: 21 Fret Wire: Stainless Steel Fret Size: Medium Jumbo (2.7 x 0.9 mm / 0.106 x 0.036") Inlay Shape: Dot Inlay Material: White Pearloid Headstock Shape: Shaped and pre-drilled for six in-line tuners (as in product images) Binding: None Tuner Hole Diameter: 10 mm (fits modern sealed tuners) Nut: White Plastic Electronics Neck Pickup: Single Coil Middle Pickup: Single Coil Bridge Pickup: Single Coil Pickup Magnets: Ceramic Controls: 1 Volume, 2 Tone Wiring: DIY (soldering required) Wiring Diagram: SSS, 1 Volume, 2 Tone, 5-Way Selector Output Jack: Not pre-drilled (builder drills to suit the body shape) Hardware Bridge: Tremolo Tuners: Sealed, Non-locking, 6-in-line Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Unfinished rectangular mahogany body blank, 36 x 48 cm and 4.4 cm thick, outline not cut, with the neck pocket, pickup, control and tremolo spring routs already cut Mahogany neck with rosewood fretboard, frets, dot position markers, fitted nut and a shaped headstock with six tuner holes drilled 1x loaded black pickguard with three black single-coil pickups, three black knobs and a selector switch 6x sealed tuners with bushings and washers 1x chrome tremolo bridge with six saddles and block 1x chrome neck plate 4x neck mounting screws 1x black rear cover plate with six string slots 3x tremolo springs and 1 spring claw 1x tremolo arm 2x Allen wrenches 1x black jack plate with output jack 1x set of strings 2x strap buttons Assorted mounting screws 1x guitar cable with one angled plug What You'll Need You will cut the body outline, drill the output jack hole, and solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For shaping the body: Bandsaw or jigsaw, rasps or spokeshave, drill with a spade bit for the output jack hole For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment Woodworking required. You cut the body outline from a rectangular blank and drill the output jack hole yourself. The neck pocket, pickup and control cavities and the wiring channel are already routed, the headstock is already shaped and drilled, and the electronics need soldering.