Thinkware Hardwiring Kit
Thinkware Hardwiring Kit: Standard 3m Cable The Thinkware Hardwiring Kit connects a compatible dash cam to constant power, ignition-switched accessory power and ground. It lets the camera detect when you park and use the parking modes supported by that model. The cable is 3m long, approximately 10ft. Measure the full route from the camera to the fuse panel before buying, including bends and the path around trim. Parking Power ACC Signal 3m Cable Fuse-Box Install Parking power that follows the ignition The BATTERY lead supplies constant power. The ACC lead tells the camera when the vehicle’s accessories switch off, and the ground lead completes the connection. Enable parking mode in the camera settings after installation. Parking features vary by camera. Motion and impact detection, time lapse, energy saving and radar recording are not available on every model. Battery protection and recording timers are configured on supported Thinkware cameras. Plan the route and verify the circuits Use the labels on the leads to identify BATTERY, ACC and ground; do not rely on wire colour alone. A circuit tester helps confirm the constant and switched circuits before installation. Choose the correct Add-a-Fuse taps for your vehicle. Low-profile, Mini, Micro 2 and ATO styles are available separately. Our installation tool package is another option if you need the tools together. For a longer route, choose the Thinkware option on our extended hardwire cable listing. It is 7m total (about 23ft), manufactured by Thinkware at that length, not a spliced extension. Thinkware recommends professional installation. Keep the cable clear of airbags, moving parts and sharp edges, then check that the camera changes between driving and parking modes. The installation video shows the process; follow the labels and manual for your own camera. What's Included One standard 3m Thinkware hardwire cable Specifications Connection (Camera/Device End) Thinkware power connector; not USB-C Cable Length 3m total; approximately 10ft Product Thinkware standard hardwiring cable SKU TW-HK Vehicle connections BATTERY, ACC and ground Compatibility exclusions Thinkware F790 and F550 Parking modes Depend on the connected dash cam and its settings Battery protection Configured in supported Thinkware dash cam settings Fuse taps Sold separately; choose the vehicle’s fuse type Frequently Asked Questions How long is this cable? It is 3m total, approximately 10ft. Measure the route around the windscreen and trim to the actual fuse panel, rather than measuring a straight line. Is the extended cable a splice added by BlackboxMyCar? For a longer route, choose the Thinkware option on our extended hardwire cable listing. It is 7m total (about 23ft), manufactured by Thinkware at that length, not a spliced extension. Will this work with the Thinkware F790 or F550? No. These models require their own compatible power connection. Check the camera model and connector before ordering. Does this cable work with VIOFO or BlackVue cameras? No. It has a Thinkware camera power connector. Similar-looking wires or a shared parking-mode feature do not make other brands compatible. Are fuse taps included? No. The base TW-HK product is the hardwire cable. Add compatible fuse taps separately and match their type to your vehicle. Which wire goes to constant power? Follow the BATTERY and ACC labels on the actual leads. BATTERY connects to a verified constant supply, ACC to a verified ignition-switched supply, and ground to a suitable unpainted chassis ground. Thinkware says to use the labels rather than assuming wire colours. Do I need to enable parking mode in the camera? Yes. The cable supplies the required connections, but parking mode must also be enabled in the dash cam settings. Available recording modes depend on the camera model. Does this guarantee recording all night? No. Runtime depends on the vehicle battery, temperature, camera consumption, voltage cutoff and recording timer. A dedicated dash cam battery pack with the correct Thinkware output connection is an alternative power source; check the installation requirements. Where do I set the low-voltage cutoff? Use the battery-protection settings on a supported Thinkware dash cam. Check its manual for the available values and choose a setting appropriate for the vehicle. The hardwire cable does not have a USB-style adjustable cutoff module. Why does the camera turn off instead of entering parking mode? Confirm that parking mode is enabled and the BATTERY lead remains powered after the ignition is off. Check the ACC circuit with a tester; some vehicles delay accessory shutdown. Have the installer verify the wiring before changing connections. Can I use the cigarette-lighter cable for the same parking features? The standard Thinkware cigarette-lighter cable powers continuous driving recording and lacks the ACC signal used for automatic parking operation. Use the compatible hardwire setup or another parking-power option specified for the camera. Can I install it myself? Thinkware recommends professional installation. The job requires identifying suitable circuits, choosing the correct fuse taps and routing the cable safely. Read the fuse-box hardwiring guide before deciding whether to arrange an installer. Resources Add-a-Fuse and battery-pack installation guide This broader guide covers fuse taps and a separate battery-pack setup. The battery pack and its charging cables are not included with TW-HK. Hardwiring a dash cam to the fuse box Choosing and fitting Add-a-Fuse taps Parking recording and power options Planning a BMW hardwire installation
More you might like
Related
[REFURBISHED] BlackboxMyCar Power Mini 10000
Related
[REFURBISHED] BlackVue CM100G LTE Module (for DR970X/DR770X
Related
[REFURBISHED] BlackVue DR750-1CH LTE Cloud Dash Cam
Related