Peel Stop Triple Thick, one quart (Zinsser 260925) Old paint that is checking, curling and flaking on a window sash, a porch post or a stretch of trim usually can't all be stripped. Peel Stop Triple Thick is Zinsser's answer for that situation: a water-based acrylic binding primer that soaks into and glues down the old coating, then builds three times thicker than an ordinary primer to fill hairline cracks and even out a weathered surface. It dries white so the finish coat is easy to judge, stays flexible as wood swells and shrinks, and takes any latex or alkyd paint after 2 hours. It is MPI #17 certified. $5.99 shipping, free at $35+ (lower 48 + DC). Shipping policy $5.99 shipping, free at $35+, no code needed (lower 48 + DC). 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (refund policy). How much a quart handles Zinsser rates it at 50 to 200 sq ft per gallon depending on film thickness and porosity, so a quart covers about 12 to 50 sq ft. Thin coats for basic priming reach the high end; thick crack-bridging coats reach the low end. That makes the quart a sensible size for a door, a few sashes or spot repairs; bigger jobs fit the gallon. Application tools (Zinsser TDS) Brush: synthetic nylon, polyester or blend; push the primer into cracks and edges. Roller: 1/2 in nap, rolled on thick, then worked into the peeling areas. Airless: 0.015 to 0.017 in tip at 2000 to 2500 psi, overlapping each pass 1 to 2 in. Apply when air, product and surface are 40 to 90 F, the surface is 5 F above the dew point and humidity is 85% or lower. Touch-dry in 30 minutes. Don't apply if rain is expected within 8 hours. Before you start Wash off dirt and chalk; Zinsser suggests its JOMAX Mildew Killer and House Cleaner for exterior mildew. Bare wood left exposed more than 4 weeks should be lightly sanded to remove weathered fibers. Spot-prime knots and severe stains with B-I-N shellac primer, and use a stain blocker such as Cover-Stain where water stains or bleeding woods are the issue. Zinsser's TDS warns that scraping or sanding old paint may release lead dust and points to the National Lead Information Hotline, 1-800-424-LEAD, for protection guidance. Cleanup is soap and warm water. Prefer a clear binder for chalky paint? Regular Peel Stop comes in a quart. Questions How do I prime a badly peeling surface? Zinsser's TDS says to scrape loose paint, wash, sand remaining edges smooth, then thin the first coat of Peel Stop Triple Thick with 10% water and work it into the peeling paint. Follow with thicker coats to bridge and fill cracked, uneven areas. How thick can I put it on? Up to 30 mils wet per application. Zinsser warns that going past 30 mils may cause mud cracking or sagging. Can I use it on a deck or as filler? No. Zinsser says it is not designed as a substitute for wood filler, caulk or drywall mud, and it is not recommended for floors, decks, surfaces under water or in prolonged water contact, or below grade. Triple Thick facts are from Zinsser technical data sheet PST-01. More primers: primers and sealers and Zinsser.